Download DSI 6 Speed Auto Transaxle Actyon PDF

TitleDSI 6 Speed Auto Transaxle Actyon
TagsVehicle Technology Transmission (Mechanics) Automatic Transmission Manual Transmission Clutch
File Size8.8 MB
Total Pages106
Table of Contents
                            DSI 6 A/T
	GENERAL INFORMATION
		1. GENERAL INFORMATION
		2. SPECIFICATIONS
		3. TIGHTENING TORQUE
	OVERVIEW AND OPERATING PROCESS
		1. OVERVIEW
		2. FEATURES
		3. MODES AND FUNCTIONS
		4. LIMP HOME MODE
		5. TRANSAXLE ELECTRONIC CONTROL SYSTEM
		6. CAN NETWORK
		7. POWER TRANSFER
	CONFIGURATION AND FUNCTIONS
		3722-01 TGS LEVER
		3680-01 DSI 6 SPEED A/T ASSEMBLY
		3680-01 VALVE BODY ASSEMBLY
		3110-01 TCU
		3680-01 INHIBITOR SWITCH
		3110-01 CIRCUIT DIAGRAM
	REMOVAL AND INSTALLATION
		3680-01 FLUID LEVEL INSPECTION
		3680-01 MAINTENANCE OPERATIONS
		3680-01 A/T ASSEMBLY
		3680-01 VALVE BODY ASSEMBLY
		3680-00 TORQUE CONVERTER
		3680-00 INHIBITOR SWITCH
		3110-01 TCU
		3722-01 TGS LEVER
		3722-06 TGS CABLE
		3110-01 DTC
                        
Document Text Contents
Page 1

DSI 6 A/T
3110-01/3680-01/3722-01/3722-06

DSI 6 SPEED AUTO TRANSAXLE

GENERAL INFORMATION

1. GENERAL INFORMATION.....................
2. SPECIFICATIONS..................................
3. TIGHTENING TORQUE..........................

OVERVIEW AND OPERATING
PROCESS

1. OVERVIEW............................................
2. FEATURES............................................
3. MODES AND FUNCTIONS.....................
4. LIMP HOME MODE................................
5. TRANSAXLE ELECTRONICAL
CONTROL SYSTEM..............................
6. CAN NETWORK.....................................
7. POWER TRANSFER...............................

CONFIGURATION AND FUNCTIONS

3722-01 TGS LEVER.................................
3680-01 DSI 6-SPEED A/T ASSEMBLY...
3680-01 VALVE BODY ASSEMBLY...........
3110-01 TCU..............................................
3680-01 INHIBITOR SWITCH.....................
3110-01 CIRCUIT DIAGRAM......................

REMOVAL AND INSTALLATION

3680-01 FLUID LEVEL INSPECTION.........
3680-01 MAINTENANCE OPERATIONS....
3680-01 A/T ASSEMBLY...........................
3680-01 VALVE BODY ASSEMBLY...........
3680-00 TORQUE CONVERTER................
3680-00 INHIBITOR SWITCH.....................
3110-01 TCU..............................................
3722-01 TGS LEVER ASSEMBLY.............
3722-06 TGS CABLE.................................
3110-01 DTC..............................................

3
5
7

8
9

11
13

14
17
18

27
37
46
51
53
54

56
57
59
73
83
85
88
90
96
99

Page 2

undefined

3680-01

DSI 6 SPEED AUTO TRANSAXLE

Page 53

DSI 6 SPEED AUTO TRANSAXLE
undefined

3680-01

Connector pin No. Switch pin No. and function

3680-01 INHIBITOR SWITCH
The TCU uses the position of this switch to
determine the position of the selector lever.
The selector lever is connected to the
transmission via a linkage mechanism which
operates the transmission selector shaft
between positions Park, Reverse, Neutral
and Drive. The inhibitor switch contains set
resistances for each position which are read
by the TCU. The TCU uses this information
to control the shifts to reverse and drive.
For models equipped with manual mode, the

range selection (+ or -) by means of switches
directly connected to the selector lever
and/or steering wheel. Movement of the lever
between Park, Reverse, Neutral and Drive
manually controls the flow of transmission
fluid, the TCU having control of the forward
gear selected in Drive.
If the lever is not in the Park or Neutral
positions, or if the switch is disconnected,
starting of the engine is inhibited.

Inhibitor sensor

Ignition circuit,
ground

3.

2. Ignition circuit(relay)

Gear lever
position
signal

4.

Gear lever position
signal, ground

5.

Back-up lamp (power)6.

Back-up
lamp (lamp)

1.

Page 54

undefined

3110-01

DSI 6 SPEED AUTO TRANSAXLE

3110-01 CIRCUIT DIAGRAM

Page 105

DSI 6 SPEED AUTO TRANSAXLE
undefined

0000-00

The following screen is displayed when the process is finished. Follow the instructions on the
screen.

3.

When all the processes are carried out, the TCU initialization is completed.4.

Similer Documents