Download QB.11-R InstallManage v5.0 PDF

TitleQB.11-R InstallManage v5.0
File Size5.6 MB
Total Pages211
Table of Contents
                            Introduction
	Products Covered in this Guide
	About This Book
	Reference Manual
	Wireless Network Topology (Point-to-Point Link)
	Management and Monitoring Capabilities
		Web Interface
		Command Line Interface
		SNMP Management
Installation and Initialization
	Hardware Overview
		Power-over-Ethernet
		Serial Connection
	Product Package
	Installation Procedure
		Step 1: Plan for Installation
		Step 2: Choose a Location
		Step 3: Gather Required Tools
		Step 4: Unpack Shipping Box
		Step 5: Determine Proper Mounting Orientation
		Step 6: Assemble Mounting Hardware
		Step 7: Perform Confidence Test (Optional)
		Step 8: Mount the Unit
		Step 9: Plug in the Cables
		Step 10: Power on the Unit
		Step 11: View LEDs
		Step 12: Align the Antenna
			Antenna Alignment Commands
		Step 13: Install Documentation and Software
	Initialization
		ScanTool
		Setting the IP Address with ScanTool
	Logging in to the Web Interface
System Overview
	Changing Basic Configuration Information
		Country and Related Settings
		Dynamic Frequency Selection (DFS)
		Transmit Power Control
	SU Registration
	Dynamic Data Rate Selection (DDRS)
	Virtual Local Area Networks (VLANs)
	Quality of Service (QoS)
		Concepts and Definitions
			Packet Identification Rule (PIR)
			Service Flow Class (SFC)
			QoS Class
Basic Management
	Navigation
	Rebooting and Resetting
		Rebooting
		Resetting Hardware
		Soft Reset to Factory Default
	General Configuration Settings
	Monitoring Settings
	Security Settings
		Encryption
		Passwords
	Default Settings
	Upgrading the Unit
System Status
	Status
		System Status
		Systems Traps
	Event Log
Configuration
	System Parameters
		Bridge and Routing Modes
			Bridge Mode
	Network Parameters
		IP Configuration
			Bridge Mode
			Routing Mode
		Roaming
		DHCP Server
			Add Entries to the DHCP Server IP Pool Table
			Edit/Delete Entries in the DHCP Server IP Pool Table
		Spanning Tree (Bridge Mode Only)
			Edit/Disable Entries in the Priority and Path Cost Table
		SNTP-DNS
			SNTP-DNS Overview
			Primary and Secondary SNTP Servers
			DNS Server requirement
			Synchronizing Time of Day
		Configuring SNTP-DNS
		IP Routes (Routing Mode Only)
		DHCP Relay Agent (Routing Mode Only)
	Interface Parameters
		Wireless
			Base Mode
			Satellite Mode
		Ethernet
	SNMP Parameters
		Trap Host Table
			Add Entries to the Trap Host Table
			Edit/Delete Entries in the Trap Host Table
	Management Parameters
		Passwords
		Service
			SNMP Configuration Settings
			HTTP Configuration Settings
			Telnet Configuration Settings
			Serial Configuration Settings
	Security Parameters
		MAC Authentication (BSU Only)
		Encryption
		RADIUS Authentication (BSU Only)
	Filtering Parameters
		Overview
			Increasing Available Bandwidth
			Increasing Network Security
			Sample Use and Validation
			Setting the ARP Filter
		Ethernet Protocol
		Static MAC Address Filtering
			Overview
			Static MAC Filter Examples
			Static MAC Filter Configuration
			Add Entries to the Static MAC Filter Table
			Edit/Delete Entries in the Static MAC Filter Table
		Storm Threshold
		Broadcast Protocol Filtering
		IP Access Table Filtering
			Add Entries to the IP Access Table
			Edit/Delete Entries in the IP Access Table
	Intra-Cell Blocking (BSU Only; Bridge Mode Only)
	VLAN Parameters
		Overview
			VLAN Modes
		BSU VLAN Configuration
			Add BSU VLAN Table Entries
			Edit or Delete BSU VLAN Table Entries
			Restricting Unit Management
			Providing Access to Hosts in the Same VLAN
		SU VLAN Configuration
			Add SU Table Entries
			Edit SU Table Entries
			Typical User VLAN Configurations
		SU VLAN Functionality
		SU VLAN Configuration Via Radius Server
	QoS (Quality of Service) Parameters (BSU only)
		QoS PIR Configuration
		QoS SFC Configuration
		QoS Class Configuration
			Create a New QoS Class
			View/Edit an Existing QoS Class
		QoS SU Configuration
		QoS Configuration for a Management Station
			Introduction
			Step 1: Add Packet Identification Rules
			Step 2: Add Service Flow Classes
			Step 3: Configure QoS Classes
		QoS Configuration via Radius Server
	Syslog Parameters
		Overview
		Syslog Host Table
	RIP Parameters (Routing Mode Only)
	NAT (SU Only; Routing Mode Only)
Monitoring
	Wireless
		General Performance
		WORP Interface Performance
	ICMP
	Per Station
		Site Survey
	Features
	Link Test
	Interfaces
	IP ARP Table
	IP Routes
	Learn Table
	RIP
	RADIUS (BSU Only)
	QoS (BSU Only)
	Temperature
		Current Temperature
		Log
	Spectrum Analyser
		Index
		Channel Number and Channel Frequency
		802.11 Frames
		Unrecognised Frames
		Min RSSI
		Max RSSI
		Graph
Commands
	Download
	Upload
	Reboot
	Reset
	Help Link
	Downgrade
Procedures
	TFTP Server Setup
	Web Interface Image File Download
	Configuration Backup
	Configuration Restore
	Soft Reset to Factory Default
	Hard Reset to Factory Default
	Forced Reload
	Image File Download with the Bootloader
		Download with ScanTool
		Download with CLI
Troubleshooting
	Connectivity Issues
		Unit Does Not Boot
		Serial Link Does Not Work
		HyperTerminal Connection Problems
		Ethernet Link Does Not Work
		Cannot Use the Web Interface
	Communication Issues
		Two Units Are Unable to Communicate Wirelessly
	Setup and Configuration Issues
		Lost Password
		The Unit Responds Slowly
		Web Interface Does Not Work
		Command Line Interface Does Not Work
		TFTP Server Does Not Work
		Online Help Is Not Available
		Changes Do Not Take Effect
	VLAN Operation Issues
	Link Problems
		General Check
		Statistics Check
		Analyzing the Spectrum
			Avoiding Interference
			Conclusion
Country Codes and Channels
	2.4 GHz Channels/Frequencies by Country
	5 GHz Channels/Frequencies by Country
Technical Specifications
	Part Numbers
		Radio Units
			North America Region
			Europe and Middle East Regions
			Asia Pacific Region
			Caribbean and Latin America Region
		Accessories
			Surge Arrestors/Cables
			Power Injector
			Outdoor Ethernet Cables
	Regulatory Approvals and Frequency Ranges
		Model 2454-R Regulatory Approval and Frequency Ranges
		Model 4954-R Regulatory Approval and Frequency Ranges
		Model 5054-R Regulatory Approval and Frequency Ranges
		Model 5054-R-LR Regulatory Approval and Frequency Ranges
	Integrated Antenna Specifications
		Model 2454-R
		Model 4954-R
		Model 5054-R/5054-R-LR
	OFDM Modulation Rates
	Wireless Protocol
	Interfaces
	Receive Sensitivity
		Model 2454-R
		Model 4954-R
		Model 5054-R
		Model 5054-R-LR
	Maximum Throughput
		Model 2454-R
		Model 4954-R
		Model 5054-R/5054-R-LR
	Latency
	Transmit Power Settings
		Model 2454-R
		Model 4954-R
		Model 5054-R
		Model 5054-R-LR
	Range Information
		Model 2454-R
		Model 4954-R
		Model 5054-R
		Model 5054-R-LR
	Hardware Specifications
	Software Features
	Management
	LEDs
	Power Requirements
	Physical and Environmental Specifications
	MTBF and Warranty
Lightning Protection
Technical Services and Support
	Obtaining Technical Services and Support
	Support Options
		Proxim eService Web Site Support
		Telephone Support
		ServPak Support
Statement of Warranty
	Warranty Coverage
	Repair or Replacement
	Limitations of Warranty
	Hours of Operation
	Other Information
		Search Knowledgebase
		Ask a Question or Open an Issue
                        
Document Text Contents
Page 1

Tsunami QuickBridge.11 Installation and Management Guide
Model 2454-R
Model 4954-R
Model 5054-R
Model 5054-R-LR
Version 5.0.0

Page 2

QB.11-R Installation and Management
Copyright
©2010 Proxim Wireless Corporation, San Jose, CA. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634;
5,875,179; 6,006,090; 5,809,060; 6,075,812; 5,077,753. This manual and the software described herein are copyrighted with all rights
reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
in any form by any means without the written permission of Proxim Wireless Corporation.

Trademarks
Tsunami, Proxim, and the Proxim logo are trademarks of Proxim Wireless Corporation. All other trademarks mentioned herein are the property
of their respective owners.

Tsunami QuickBridge.11-R Installation and Management Guide
P/N 73893 January 2010

IMPORTANT!
Before installing and using this product, see the

Safety and Regulatory Compliance Guide located on the product CD.
2

Page 105

Configuration QB.11-R Installation and Management
VLAN Parameters
Edit or Delete BSU VLAN Table Entries

To edit or delete entries in the BSU VLAN Table, click the Edit/Delete Table Entries button, make your changes, then
click OK for your changes to take effect.

Restricting Unit Management

Management access to the unit can be easily secured by making management stations or hosts and the unit itself
members of a common VLAN. Simply configure a non-zero management VLAN ID: management of the unit will be
restricted to members of the same VLAN.

CAUTION: If a non-zero management VLAN ID is configured, management access to the unit is restricted to hosts that
are members of the same VLAN. Ensure your management platform or host is a member of the same VLAN
before attempting to manage the unit or you will lose access to the unit.

Providing Access to Hosts in the Same VLAN

The VLAN feature lets hosts manage the unit. If the Management VLAN ID matches a VLAN User ID, those hosts who
are members of that VLAN will have management access to the unit.

CAUTION: Once a VLAN Management ID is configured and is equivalent to one of the VLAN User IDs, all members of
that VLAN will have management access to the unit. Be careful to restrict VLAN membership to those with
legitimate access to the unit.

SU VLAN Configuration
The HTTP Interface to configure SU VLAN parameters is shown in the following figure.
105

Page 106

Configuration QB.11-R Installation and Management
VLAN Parameters
Add SU Table Entries

To add entries to the SU VLAN Table, click the Add Table Entries button. Enter the desired parameters in the
corresponding fields, then click Add to add and save the entry.

The following parameters are configurable:

• MAC: Enter the MAC address of the SU to be configured.
• SU VLAN Mode: The SU VLAN mode can be either Transparent, Trunk, Access, or Mixed (by default, the SU is in

Transparent mode).
• Access VLAN ID: The Access VLAN ID is configurable in any mode, but applies only when the SU is in Access

mode. The Access VLAN ID values range from 1 to 4094; the default value is 1.
• Access VLAN Priority: The Access VLAN Priority is configurable in any mode, but applies only when the SU is in

Access mode. The Access VLAN priority values range from 0 to 7; the default priority is 0. For voice frames, the
priority field is set to the VoIP configured value (5 according to latest IETF draft, or 6 according to IEEE 802.1D)
regardless of the priority value configured.

• Management VLAN ID: The management VLAN ID is configurable in any mode. The management VLAN ID has a
default value of untagged (-1) and may be configured with a value in the range of 1 to 4094.

• Management Priority: The Management VLAN priority values range from 0 to 7 and the default priority is 0 (zero).
• Outer VLAN ID: The Outer VLAN ID is configurable only in Trunk mode. If this parameter is set to -1, the QinQ

mechanism is disabled by default. If this parameter is set to any number between 1 and 4094, all tagged data is
appended with an additional VLAN ID as the outer VLAN ID.

• Outer Priority: The Outer VLAN Priority is configurable only in Trunk mode, and applies only when the SU is in Trunk
mode and the Outer VLAN ID is configured to a value between 1 and 4094. The Outer VLAN Priority values range
from 0 to 7; the default priority is 0. For voice frames, the priority field is set to the VoIP configured value, regardless of
the priority value configured.
106

Page 210

QB.11-R Installation and Management
E
Statement of Warranty

Warranty Coverage

Proxim Wireless Corporation warrants that its Products are manufactured solely from new parts, conform substantially to
specifications, and will be free of defects in material and workmanship for a Warranty Period of 1 year from the date of
purchase.

Repair or Replacement
In the event a Product fails to perform in accordance with its specification during the Warranty Period, Proxim offers
return-to-factory repair or replacement, with a thirty (30) business-day turnaround from the date of receipt of the
defective Product at a Proxim Wireless Corporation Repair Center. When Proxim Wireless has reasonably determined
that a returned Product is defective and is still under Warranty, Proxim Wireless shall, at its option, either: (a) repair the
defective Product; (b) replace the defective Product with a refurbished Product that is equivalent to the original; or (c)
where repair or replacement cannot be accomplished, refund the price paid for the defective Product. The Warranty
Period for repaired or replacement Products shall be ninety (90) days or the remainder of the original Warranty Period,
whichever is longer. This constitutes Buyer’s sole and exclusive remedy and Proxim Wireless’s sole and exclusive
liability under this Warranty.

Limitations of Warranty
The express warranties set forth in this Agreement will not apply to defects in a Product caused; (i) through no fault of
Proxim Wireless during shipment to or from Buyer, (ii) by the use of software other than that provided with or installed in
the Product, (iii) by the use or operation of the Product in an application or environment other than that intended or
recommended by Proxim Wireless, (iv) by modifications, alterations, or repairs made to the Product by any party other
than Proxim Wireless or Proxim Wireless’s authorized repair partners, (v) by the Product being subjected to unusual
physical or electrical stress, or (vii) by failure of Buyer to comply with any of the return procedures specified in this
Statement of Warranty.

Buyers should return defective Products within the first 30 days to the merchant from which the Products were
purchased. Buyers can contact a Proxim Wireless Customer Service Center either by telephone or via web. Calls for
support for Products that are near the end of their warranty period should be made not longer than seven (7) days after
expiration of warranty. Support and repair of products that are out of warranty will be subject to a repair fee. Contact
information is shown below. Additional support information can be found at Proxim Wireless’s web site at http://
support.proxim.com.

USA & Canada Customers

Call Technical Support: Phone: 408-383-7700

Toll Free: 866-674-6626

Hours: 6:00 AM to 6:00 P.M. Monday - Friday, Pacific Time

APAC Customers

Call Technical Support: Phone: +91 40 23115490

Hours: 9:00 AM to 6:00 P.M. Monday - Friday, IST (UTC/GMT +5:30 hrs)

International Customers

Call Technical Support: Phone: 408-383-7700

Hours: 6:00 AM to 6:00 P.M. Monday - Friday, Pacific Time
210

Page 211

Statement of Warranty QB.11-R Installation and Management
Hours of Operation
When contacting the Customer Service for support, Buyer should be prepared to provide the Product description and
serial number and a description of the problem. The serial number should be on the product.

In the event the Customer Service Center determines that the problem can be corrected with a software update, Buyer
might be instructed to download the update from Proxim Wireless’s web site or, if that’s not possible, the update will be
sent to Buyer. In the event the Customer Service Center instructs Buyer to return the Product to Proxim Wireless for
repair or replacement, the Customer Service Center will provide Buyer a Return Material Authorization (“RMA”) number
and shipping instructions. Buyer must return the defective Product to Proxim Wireless, properly packaged to prevent
damage, shipping prepaid, with the RMA number prominently displayed on the outside of the container.

Calls to the Customer Service Center for reasons other than Product failure will not be accepted unless Buyer has
purchased a Proxim Wireless Service Contract or the call is made within the first thirty (30) days of the Product’s invoice
date. Calls that are outside of the 30-day free support time will be charged a fee of $250.00 (US Dollars) per Support Call.

If Proxim Wireless reasonably determines that a returned Product is not defective or is not covered by the terms of this
Warranty, Buyer shall be charged a service charge and return shipping charges.

Other Information

Search Knowledgebase

Proxim Wireless stores all resolved problems in a solution database at the following URL: http://support.proxim.com.

Ask a Question or Open an Issue

Submit a question or open an issue to Proxim Wireless technical support staff at the following URL: http://
support.proxim.com/cgi-bin/proxim.cfg/php/enduser/ask.php.
211

Similer Documents